Exam Questions
Exam Questions

Safety factors relating to the vehicle, load and passengers

page 2 of 2

Question № 11

Id: 4142
points: 3

What should a tram driver do in this situation, immediately after stopping the tram at the tram stop?

    Make sure, using the right exterior mirror that vehicles did not stop on the roadway.
    Turn on the right turn signal to indicate a stop.
    Immediately open the door to observe the movement of passengers.

Question № 12

Id: 7093
points: 3

Can you continue driving with passengers, after noticing a breakdown in the door closing mechanism, in the first wagon?

    No.
    Yes, after blocking the damaged door and turning off the "drive lock".
    Yes, with the doors open, but only to the nearest tram terminus.

Question № 13

Id: 7094
points: 3

Which of the following types of brakes can not be checked at the depot?

    The Drum (brake shoe)
    The electrodynamic brakes
    The rail brakes.

Question № 14

Id: 7095
points: 3

Which, of the following types of brakes, cannot be checked at the depot?

    The safety brake.
    The rail brake.
    The electrodynamic brake.

Question № 15

Id: 7096
points: 3

What, among others, should be checked before you set about driving a double-carriage tram?

    The first aid kit.
    The condition of the coupler between the carriages.
    That the carriage is equipped with a reflective warning triangle.

Question № 16

Id: 7097
points: 3

What, among others, should be checked before you set about driving a tram?

    The condition of the bodywork, fastening of the passenger seats and handrails.
    Validity of the tram's registration document.
    That the tram is equipped with a reflective warning triangle.

Question № 17

Id: 7098
points: 3

In what position should the coupling be when connecting tram carriages?

    Folded.
    Unfolded
    The position of the coupling is irrelevant.

Question № 18

Id: 7099
points: 3

What you should you not do when coupling two carriages?

    Loosen the shoe brakes of the carriage to be coupled.
    Turn on the position lights.
    Open the door in the second carriage.

Question № 19

Id: 7100
points: 3

What you should you not do when coupling two carriages?

    Release the thrustor of the carriage to be coupled.
    Turn on the side marker lights.
    Adhere to the priinciples of Occupational Safety and Health (OSH)

Question № 20

Id: 7101
points: 3

What could be the cause of the diconnection of the linear contactor on the tram?

    A damaged converter.
    A damaged reversing switch.
    Short-circuit in the circuits of one of the engines.

page 2 of 2