Exam Questions
Exam Questions

Driving technique

page 1 of 2

Question № 1

Id: 6785
points: 3

In what order should you perform activities preparing you to drive the truck?

    Fasten the seat belts, position the mirrors and the driver's seat.
    Position the driver's seat, adjust the mirrors and fasten the seat belts if the truck is equipped therewith.
    Adjust the mirrors, position the driver's seat and then fasten the seat belts.

Question № 2

Id: 6786
points: 3

While driving a truck, what should you see in properly-adjusted external mirrors ("rear-view mirrors")?

    Only the sides of the truck.
    The area behind the truck and the sides of the truck.
    Only the adjacent lane.

Question № 3

Id: 6787
points: 3

What is the correct position of the hands on a steering wheel while driving a truck on a motorway?

    Both hands at the top of the steering wheel (in the "12 o'clock" position).
    Left hand on "9 o'clock", right hand on "3 o'clock".
    Both hands at the bottom of the steering wheel (in the "6 o'clock" position).

Question № 4

Id: 6788
points: 3

How should you proceed when driving a loaded truck downhill?

    Engage a higher gear.
    Brake with the emergency brake.
    Use the retarder to brake or brake with the engine.

Question № 5

Id: 6789
points: 3

While driving a truck, at which point will you press the clutch if you intend to brake?

    Before I press the brake.
    Together with the brake.
    When the speed of the vehicle drops to minimum for the current gear.

Question № 6

Id: 6790
points: 3

What should you do if you have to perform an emergency braking manoeuvre with a truck equipped with anti-lock braking system (ABS)?

    Firmly press the brake and clutch pedals and do not release them untill the ABS system activates.
    Firmly press the brake pedal and reduce the pressure the moment the ABS system activates.
    Pulse brake until the ABS system activates.

Question № 7

Id: 6791
points: 3

Which of the following conditions must be met to activate the cruise control?

    The vehicle has attained the minimum speed specified by the manufacturer.
    The clutch pedal has been pressed.
    The vehicle speed limit function has been turned on.

Question № 8

Id: 6792
points: 3

How should you negotiate a bend when driving a truck?

    By smoothly adjusting the trajectory, taking the bend into account.
    By negotiating the bend with the clutch pedal pressed.
    By maintaining the engine's maximum RPM along the whole length of the bend.

Question № 9

Id: 6793
points: 3

While driving a truck, how will you correctly turn right at an intersection?

    With the use of the auxiliary brake.
    By starting the turn away from the right edge of the road, if this is necessary in view of the dimensions of the vehicle.
    By starting the right turn after reaching the middle of the road, regardless of the vehicle's dimensions.

Question № 10

Id: 7204
points: 3

In which gear will you start driving a truck forward in good road conditions, in a flat area?

    In the lowest gear, as specified by the producer.
    In the third gear, unless the vehicle is loaded.
    In the first gear of the top gearbox.

page 1 of 2