page 1 of 4

Which of the following actions should you perform to move off smoothly?

Gradually disengage the clutch pedal.
Suddenly disengage the clutch pedal.
First increase the engine revolutions significantly and then quickly disengage the clutch pedal.

What might be the result of too weak pressure on the brake pedal of a passenger car?

Lengthening of the braking distance.
Blocking of the wheels.
Losing steerability.

What might be the result of too strong braking of a passenger car not fitted with the ABS?

Shortening of the braking distance by at least half.
Losing steerability.
Damaging the brakes.

Which of the following ways of braking in a passenger car fitted with the ABS is the most effective?

Pulse pressing of the brake pedal.
Fast and strong pressing of the brake pedal.
Pressing the clutch pedal and then the brake pedal.

Which of the following action should be taken when the operating ABS pushes out the brake pedal while braking?

Sustain the pressure on the brake pedal.
Decrease the pressure on the brake pedal.
Release the brake pedal.

In which of the following situations can the ABS help a driver in sustaining steerability?

While braking, when the vehicle started laterally skidding.
Only while braking on the straight part of the road.
Only while braking on the bend.

Which of the following results may you cause when moving off uphill you release the emergency brake lever too early in relation to releasing the clutch pedal?

Arrest of the engine.
Rolling down of the vehicle.
Sudden start.

You are driving at the speed of 80 km/h. What starting position will ensure optimal trajectory on the bend?

In the middle of the road, partially crossing the line shown.
By the line dividing the lanes - on the right side of the roadway.
By the right edge of the road.

You are driving at the speed of 90 km/h. What starting position will ensure optimal trajectory on the bend?

In the middle of the road, partially crossing the line shown.
By the line dividing the lanes - on the right side of the roadway.
By the right edge of the road.

How should you behave in order to accelerate the passenger car properly on a flat part of the road?

Use the engine revolutions maximally in every gear.
Accelerate to such speed in lower gear that after switching to the next gear the vehicle does not jerk and does not choke.
In every case increase the gear by two.

page 1 of 4